#1.IWISS PEX CINCH Crimping Tool Crimper
The IWISS PEX CINCH Crimping Tool Crimper is the best pex crimp tool because it’s the most cost-effective crimp tool for house holding. It’s easy to use for even beginners, and comes with plenty of backup cinch rings for future plumbing.
[embedyt] https://www.youtube.com/watch?v=BJXgKmCEBac[/embedyt]Every plumber needs a PEX crimp tool. This convenient tool provides an easy method to create a watertight seal, at the joint between the PEX fitting and the tubing. There are many similar PEX crimp tools on the market, and most of them can do its job quite well, which means you can randomly choose one – maybe the cheapest – if you just want something usable. However, no matter if you are a professional, hobbyist, or part time handyman, you definitely love more convenience, safety and comfort.
As higher requirements have been put forward, the best PEX crimp tool should have a balanced performance to meet everyone’s needs. Most of the PEX crimp tools are designed for clamp sizes from 3/8” to 1”, allowing them to work on all PEX tubing types. However, most of the problems come from the crimp rings. Rings produced by different manufacturers usually have different structure, and some may need special jaws. Certainly you can buy crimper kit with various jaws if you have to deal with all types of crimp rings in your daily work.
Otherwise, you can save your money by purchasing a less universal crimper according to the types of the rings which you use the most, and avoid using unsuitable brand name kits. The next step is to find the crimper with the best comfort. A good crimper usually has longer handles thus making it easier to open before you put the tubing into the jaw. It also makes it easier to press when you crimp the joint. Moreover, the handles should have ergonomic shape, or at least be covered with material which is soft, anti-skid and insulating.
Some crimpers may have a strong spring between its two handles, automatically opening the crimper and allowing an easy one hand operation. We highly recommend it because it’s more ergonomic and user-friendly. But there is a potential problem that it may not be as durable as a traditional crimper, because this design leads to higher inner force to the whole structure, making components wear faster. Such crimpers are still trustworthy, so the key to your choice is whether you prefer the better user experience or the longer service life of the tool.
Best Pex Crimp Tool
- #1.IWISS PEX CINCH Crimping Tool Crimper
- #2.Zurn QCRTMH Copper Crimp Tool
- #3.PEX GUY One Hand Cinch Pinch Clamp Tool
- #4.Apollo PEX Quick Cinch
- #5.Crimp Tool Pex Multi Size
#1.IWISS PEX CINCH Crimping Tool Crimper
If you want a simple, convenient crimper for PEX crimping by yourself, keeping away expensive bills from plumbers, we highly recommend the IWISS PEX crimper. This is the best PEX crimp tool for house holding, because it perfectly does its job and never comes with anything unnecessary which may occupy your living space.
The IWISS crimper comes with 20 pieces of 1/2 inch and 10 pieces of 3/4” stainless steel PEX clamps. In other words, this is enough for tubing maintenance needs for many years.It goes without saying that the crimper itself can stand a lifetime service, since it never gets rusty. The head part of the tool is made of #40 steel and is forged.
As for long term usage, this tool always keeps integrated mechanical property. As you have got different tubes, you may need to buy extra PEX fittings and rings, but no other crimper tool is needed. The IWISS crimper is suitable for clamps from 3/8” to 1”, and can work with any f2098 standard stainless steel clamps. It can’t work with those completely round rings; in contrast, it does better than those universal crimpers when crimping suitable clamps. The SWISS crimper is effortless to use. It features a ratchet safety-release function, which brings fast and reliable installation for PEX pipe.
Moreover, the long handle saves 30% labor and makes it easier to operate. The red rubber tightly covering the handles is a bit sticky, preventing the tool from slipping out of your hand. Finally, the SWISS crimper is user-friendly. This tool is factory adjusted and it will come with a calibration tool, so you hardly get a leak even if you are a beginner of PEX crimping. In addition, if you have made a mistake, you can easily remove the original rings with a screwdriver or a vice. The instruction is simple and clear, allowing you to master the PEX crimping in no more than twenty minutes.
#2.Zurn QCRTMH Copper Crimp Tool
Zurn produces the best PEX crimp tool set for professions. It comes with almost everything you need for copper crimping.Better yet, all the tools it included are super reliable, allowing you to crimp thousands of fittings without one failure. It may cost a bit more, but plumbing is not the place to save money.
This tool set is so dependable that we can’t pass it when discussing about PEX crimping. The Zurn crimp tool is specially designed for copper rings. The copper rings are completely round, so they are not as easy to install as those stainless steel rings. Contrarily, the copper rings holds better, because they won’t stretch back after being crimped.
This tool set works with any brand name copper rings, and spares no pains after you finish the job. The tools in this set have nice craftsmanship. They have reliable steel construction, and never get rusty after long term usage. As it requires more labor to press the copper rings, the crimper is bigger than normal crimpers. Still, the handles never get wrapped. If you make a mistake, you can easily remove the ring with the cutter included in this set. However, it’s a pity that the cutter can’t be used to cut the PEX tubing, and you have to buy a pipe cutter. Finally, we remind you that this tool set can’t work with stainless “cinch” rings. There is no need to go back for convenience since you have got extraordinary reliability, and it’s only a waste of money to do such a try.
#3.PEX GUY One Hand Cinch Pinch Clamp Tool
PEX GUY is not popular, but we believe it produces the best PEX crimp tool with one-hand operation on the market.We highly recommend the PEX GUY clamp tool not only because it is durable, but also for the unique design that it adds a LED light to provide visual confirmation of cinches.
Some crimpers may lock up when crimping 3/4” or 1” rings, because they require more pressure. To make things worse, they may break if you put too much force to release them.You will never get similar trouble if you use the PEX GUY crimper, because the handles and gears won’t lose shape when being pressed. The body of the PEX GUY crimper is made of 10” high quality durable steel.
As we mentioned above, this tool has a LED light. By using this tool, you can spare your hand or mouth to hold a flashlight in dark workplaces. It also has an instruction manual telling you how to turn on the light and change the battery. Finally, the PEX GUY crimper is very budget friendly. There are other one-hand crimpers on the market, but most of them are severak times more expensive than the PEX GUY.
#4.Apollo PEX Quick Cinch
The Apollo PEX is the best PEX crimp tool for cinch clamps. It works with Oetiker pex pinch clamps 3/8”, 1/2”, 3/4”, and 1”, and is also suitable for Apollo pex and Murray pex pinch clamps from 3/8” to 3/4”.The Apollo crimper is an imported product. It’s quality, universal and easy to use, and is budget friendly compared with the cost of a full piping project.
It’s also portable and can be easily carried for an outdoor gardening project. It’s not a one-hand tool, but the pressing is quite effortless and doesn’t require much strength to engage at all. Since many people love its convenience, the Apollo quickly became one of the most popular PEX crimp tools on the market. Finally, this tool is not for use with Zurn Qickclamp crimp rings.
Other rings which are not mentioned above may not be suitable either, so you should ask the manufacturer before purchasing, or simply use the suitable rings instead.
#5.Crimp Tool Pex Multi Size
Conbraco produces one of the best PEX crimp tool sets on the market. The Conbraco tool set has a wide size range of suitable rings, and is convenient for professional plumbers.In terms of sizes, the Conbraco crimper comes with an open end wrench and jaws in 3/8”, 1/2”, 3/4” and 1”. This tool set meets the demands of a regular crimping project, and can be easily carried with its case.
The jaws can be changed, and the crimping force is adjustable. For beginners, this tool set is a bit difficult to adjust, and may be too much for their requirements.But for skilled plumbers, this tool set provides an accurate operation to make a perfect joint. The crimper is a bit big, so it takes more effort to work in a small space.
But the pressing is easy, and you won’t get any leaks if you use it correctly.