Uniweld RHP400 Nitrogen Regulator
The Uniweld RHP400 is the best nitrogen regulator for those who want a premium device. It is both precise and durable with an excellent build quality. The Uniweld is a brand name you can trust. It is a standard 0-400 PSI nitrogen regulator and can fit CO2 tanks with an adaptor.MORE INFO
We thoroughly tested 15 products, surveyed 48 random consumers, spoke to 5 industry experts, and spent 17 hours researching reviews online. Each metric below is computed by taking the weighted average of many computed data points. Data points are quantified on a 1-10 scale based on test results, consumer and expert opinions, and online reviews.
If you have a grill or kegerator, chances are you will need the best nitrogen regulator. They essentially help reduce the highly pressurized gas or liquid from a tank to a usable form. Nitrogen regulators are also known as beer regulators. However, they are not just limited to be used at the bar or home. They can be used for all sorts of applications and industries. Air regulators are used from cooking to air compressors to delivering propane gas.
The best nitrogen regulator is a device that will efficiently control the flow of CO2 or nitrogen from the gas cylinder. Once you have dialed down the air pressure, you can deliver the new output to anything. One of the most popular commercial uses is to deliver CO2 from a highly pressurized air tank to syrup to make carbonated drinks.
A nitrogen regulator is usually composed of a cylinder value, a shut-off value, a pressure gauge, and a tube. The cylinder value is normally used to adjust the pressure of the gas coming in. The pressure gauge will accurately indicate the pressure of the gas going out. Sometimes there will be another gauge to measure the pressure of the air coming in. Some gauges will even tell you how much gas is left in your tank. Finally, there will usually also be a shut-off value to make sure there is some sort of quick emergency shut off.
There are different types of regulators available on the market. In general, you have primary and secondary regulators. There are also CO2 and Nitrogen regulators. And finally, you have single gauge and dual gauge regulators. We will go into detailed about these below in our buying guide section. Just know for now that a primary regulator is the most standard option available.
Best Nitrogen Regulator Reviews
- Uniweld RHP400 Nitrogen Regulator
- TurboTorch DP250-800-580 Nitrogen Purge Regulator 800 PSIG
- BETOOLL Nitrogen Regulator
- 30 Series Nitrogen Gas Regulator 450 PSI
- KegWorks Double Gauge Nitrogen Regulator
Uniweld RHP400 Nitrogen Regulator
Uniweld is one of the top brand names in the gas regulator industry. It is a highly trusted brand that has a long history of customer satisfaction. It is the preferred brand of many professionals and fortune 500 companies. This is because it has incredible durability and great performance. The trade off is that you tend to pay a premium for this.
If you want the best nitrogen regulator that is precise and durable, you should look at the Uniweld RHP400.
This is a standard 0-400 PSI gas regulator designed for nitrogen tanks. However, it can also be used with CO2 tanks with an adaptor. We like that this nitrogen regulator is simple to use and durable as a rock. Other nitrogen regulators we have tried always has some kind of little flaw. There could be a valve that gets stuck or a pressure gauge that malfunctions. Maybe the numbers are small and hard to read on the pressure gauge. Or the regulator does not fit any tanks. We are scratching our heads to find a flaw in the Uniweld RHP400.
In terms of build quality, the Uniweld RHP400 features a large brass tee handle with a stainless steel adjustment screw. This ensures a smooth and accurate delivery pressure adjustments. There is a self re-seating relief valve and a very durable brass piston designed diaphragm. For connection, you have a CGA580 inlet connection and a 1/5 inch male flare outlet connection.
All in all, this is a very good nitrogen regulator for its price. The thread quality on the fittings is quite good and it is very easy to operate. The housing is solid brass and made to last. The gauges are protected by rubber boots. However, if you want higher PSI delivery, you should look for a more expensive regulator. The Uniweld RHP400 regulates up to 400 PSI but we would say 350 PSI to be safe.
TurboTorch DP250-800-580 Nitrogen Purge Regulator 800 PSIG
For those who need the best nitrogen regulator for high pressure, Turbo Torch makes one of the better ones in the industry. Although Turbo Torch sells the regulator in a complete purge kit, you can certainly buy the regulator component separately. The entire nitrogen purge kit is designed to pressure check HVAC lines, blow clean components, and flush drain lines.
This particular nitrogen regulator has a 800 PSI delivery. This is leagues above the standard 400 PSI delivery of a standard nitrogen regulator. The delivery range is 0-800 PSI and works quite well at higher PSIs. There is a large adjusting knob that is quite smooth and allows for precise micro-adjustments. So in terms of performance and accuracy, we have nothing negative to say.
On the durability front, we must admit we are a bit disappointed. It just doesn’t feel like a premium product when you hold it. The protection around the gauges are made of cheap plastic and not something durable. For premium prices, we kind of expected something a bit more durable. This is not to say the entire regulatory feels like a cheap replica. It is just that our expectations were quite high for such a premium product. We do like how the housing for the body is made of a nice forged brass. The housing cap is zinc aluminum, which is quite agreeable.
If you weigh the pros and cons of the TurboTorch High Pressure Nitrogen Regulator, you still come out on top. Besides the durable issue, everything else is spot on. What we like the most is the high PSI range of 0-800 PSI and the accuracy. And if you are not totally convinced, there is a nice three year warranty. This single stage regulator has a 1/4” flare fitting.
BETOOLL Nitrogen Regulator with 0-400 PSI Delivery Pressure
The BETOOLL gas regulator is the best nitrogen regulator for those looking for value. While it is certainly not a Uniweld, it almost matches the performance and accuracy of one. BETOOLL is more of a boutique brand name. Don’t worry, you definitely do not sacrifice quality here. This particular nitrogen regulator delivers pressure of 0-400 PSI, which is considered an industry standard. It has all of the standard features and accessories of a nitrogen regulator. There is a CGA580 inlet connection and a 1/4 inch male flare outlet. The two pressure gauges are very easy to read and well protected with rubber boots.
In terms of ease of use, we found the BETOOLL pretty easy to operate as a novice. It is pretty intuitive to figure out how to screw in the air hoses. It should be easy to adjust the outgoing air pressure as well. The brass tee handle feels very sturdy and allows for a very smooth adjustment. We found the build quality to be basically on par with Uniweld’s system. However, the BETOOLL usually comes in cheaper in price than the Uniweld RHP400, which makes it a better value.
For those looking for a brand name with excellent customer service and warranty, you should look elsewhere. But if you want a nice cheap product that is basically an exact replica of the top brands, BETOOLL is your answer. The build quality and copper housing is the same quality as any of the top nitrogen regulators we have tried.
30 Series Nitrogen Gas Regulator 450 PSI
The Miller Electric 30 Series Gas Regulator is the best nitrogen regulator if you want a brand name. Miller is a huge company that makes some very quality industrial consumables and equipment. For regulators, the 30 series is quite nice. These single stage regulators are extremely durable and are highly accurate. The numbers on the gauge are easily readable. Also, the gauge reading reflects the true pressure with a small degree of error. How do we know? We independently tested each nitrogen regulator we tested with standalone pressure gauges.
The 30 series nitrogen regulator also comes with sure seat filtered seat technology. This is a fancy way of extending the shelf life of the Miller Electric regulator. What this technology does is that it prevents contaminates from entering the seating area. This helps reduce the amount of downtime and repair costs. So essentially, it will also extend seat and regulator life.
Call it what you want to all it. The bottom line is that the Miller Electric 30 Series is definitely a brand and product to trust. This particular one is rated to 600 PSI so the range is 0-600 PSI. Although it is made of nitrogen tanks, you can easily accommodate CO2 tanks with an adaptor. The large handles as easy to adjust without applying lots of pressure.
KegWorks Double Gauge Nitrogen Regulator
If you are interested in getting the best nitrogen regulator specifically designed for draft beer, this is the one for you. The KegWorks Double Gauge Nitrogen Regulator is perfect for pouring your favorite nitro stouts. This regulator is designed for draft beer systems, although you can use it for other applications as well. You can use it to check HVAc and refrigerator lines.
This nitro regulator is good for one keg and is similar to the CO2 regulator, which is sold separately by KegWorks. The most interesting and best selling point of the KegWorks is the great customer service. You would be surprised by the number of leaks that occur during the lifetime of a regulator. If you brew your own beer or operate a bar, you will likely run into these problems. Most standard regulators don’t really have customer service and you end up just buying a new unit. With KegWorks, they will walk you through how to fix things, which saves you time and money.
Of course, the KegWorks Nitrogen Regulator comes with all of the standard accessories and features of any regulator. It has two gauges that tell you the pressure of the air going into the regulator and the amount of nitrogen left. There is a nonadjustable auto shutdown that blows off excess gas at 55-65 PSI. Finally, you have a air shut off switch when you are in idle mode.You can use this with a CO2 with an adaptor. It is 2000 PSI for CO2 and 3000 PSI for nitro tanks.
Best Nitrogen Regulator Buying Guide
Most nitrogen regulators are generic pressure regulators that can deliver all sorts of liquids and gasses. It It will reduce the input pressure of a particular gas to a desired value and then deliver it out. If you don’t have a regulator, you would release all of the pressurized air at once and risk damaging something. These nitrogen regulators are particularly popular in dispensing beer and soft drinks. This is because you need a way to mix the carbonation with the drink.
Operating a nitrogen regulator can be intimidating, but you should easily get the hang of things. First, you need to hook up the regulator to your gas tank. Make sure the connection is extra tight to prevent leaking. Next, you should slowly turn on the gas, which is usually a valve on the regulator or the tank itself. There should be a pressure gauge indicating the pressure of the air coming in and the pressure of the air going out. Finally, you can turn a valve to regulate the outgoing pressure and open and close the output via a choke valve.
Trying to pick the best nitrogen regulator can be a total nightmare. There are many factors to consider and if you are new to the game, you will have to learn some terminology. You need to be aware of the type of nitrogen regulator you are getting. You should also know the type of regulator to get for what tank type. Some nitrogen regulators can fit both CO2 and nitrogen tanks, while others require separate regulators. For the most part, it is tough to interchange the two because nitrogen regulators are made to withstand higher pressures. Nevertheless, you should consider the following factors when shopping around: regulator type, performance, durability, and ease of use.
Regulator Type: In general, you have primary, secondary, and panel models. Primary regulators are your main workhorses. They are the most common option available and are directly connected to the gas tank. You primary regulator should always have some kind of shut off value for safety reasons. Primary regulators can have more than one input and more than one output.
Secondary regulators are an extension of primary nitrogen regulators. They are usually attached to primary regulators and further reduce the amount of pressure going out. They are used to fine tune the air pressure of the final product. Although secondary gas regulators are not entirely necessary, they are nice to have if you need variable air pressures.
Finally, you have panel regulators, which are large expensive regulators used in large coolers. It is an entire system usually with nice LCD displays. These panel regulators usually include one primary regulator and a bunch of secondary regulators.
Performance: The best way to gauge the performance of a nitrogen regulator is to measure the range of pressures that it regulates and delivers. More expensive regulators will be able to perform accurately without leaking at higher PSIs. This is not a commodity where everything has more or less the same price and quality. There is usually a wide range of options available for regulators with varying price tags. More expensive nitrogen regulators can usually withstand tremendous amounts of pressure coming in. They can also regulate extremely accurately over wider ranges.
Durability: If you want to get the best nitrogen regulator, be sure that it is durable. It should be able to withstand a beating and falls. There will be times when you need to apply pressure on the valves to open and close them. You may also be throwing the unit around a lot, especially if you use it for work. Finally, if you are regulating high amounts of pressure, you want a regulator that won’t burst or leak over time. It is also paramount to have accurate pressure gauges, especially if you need precision in your line of work. In general, find nitrogen regulators made of hard metals with sturdy handles. Brass bodies are usually quite durable.
Ease of Use: You should opt for a nitrogen regulator that is easy to install. They should fit most types of hoses and connection types. The best nitrogen regulators should also allow you to easily regulate the outgoing pressure. You shouldn’t have to use unnecessary force to twist and turn the valves. The readings on the gauges should be easy to read and always accurate