Best swamp cooler pads – The top evaporative cooler pad

Swamp coolers, also known as evaporative coolers, are a popular alternative to air conditioners in dry, arid regions. They work by evaporating water to produce a cooling effect, and therefore require a source of water to function.

With so many different types of swamp cooler pads on the market, it can be difficult to determine which one is the best. In this article, we’ll take a look at which swamp cooler pads are best and highlight their key features. Please do not forget to read our Buying Guide further below and the FAQ.

#1.Dial Swamp Cooler Pad Aspen Roll

The Dial Aspen Roll is the best swamp cooler pad for those who want a high-efficiency rating and minimal cleaning. Due to the long aspen fibers, they are much easier to clean up than normal aspen pads. Also, it is pretty good value for your money.

Click here for more information

Why do I need the best swamp cooler pads?

A swamp cooler is also known as an evaporative cooler, wet air cooler, or desert cooler and is a great alternative to traditional air conditioning. Swamp coolers use less energy, require less installation, and are more environmentally friendly than air conditioners. Air conditioners circulate warm or cold air and use a coil loaded with freon that is either cooled or heated. Swamp coolers simply use an evaporative pad that is loaded with water.

As warm dry air is passed through the pad, it heats up and evaporates the water, and cools down the air. Swamp coolers should ideally be operated in a warm dry environment, as operating one in a humid environment will just end up circulating humidity. Also, they should have some sort of exit source to pipe out the evaporated water, so feel free to open a window while running a swamp cooler.

It is good to know that swamp coolers can be used virtually anywhere, from cars to homes and even in outdoor environments. To properly make the best out of your swamp cooler, you will need to install the best swamp cooler pads. These pads allow more evaporative cooling space and allow the water in your swamp cooler to properly evaporate out. They also help maximize the exposure area for warm dry heat. When searching for the best swamp cooler pads, you should pay special attention to their durability.

Try to buy pads that don’t have an odor and don’t shed their fibers easily. Also, find ones that are reusable, easy to clean with a simple rinse, easy to maintain, and non-allergenic. Swamp cooler pads are generally pretty cheap, so it is probably a good idea to pay up a bit for better quality.

Best Swamp Cooler Pads

#1.Dial Swamp Cooler Pad Aspen Roll – Top Aspen Pad

The Dial Swamp Cooler Aspen Cooler Pads Roll is the best swamp cooler pad. We really like how these pads come in roll form so you can cut it out and fit it to whatever size for your evaporative cooling system. Although they are a bit hard to cut, you can definitely get the job done with the right tools. This roll is 24 feet long and is plenty of padding to last you a few years.

These aspen cooler pads are obviously made of aspen fibers. The fibers are held together in a pad form with some plastic netting. They have a high-efficiency rating and give you probably the most cooling capacity for a standard swamp cooler. However, the trade-off is that they can be quite messy and leave behind a lot of aspen shavings. They can also clog pumps and water tubes.

In other words, they require a lot more maintenance than normal. The one good thing about these pads is that they use extra-long virgin aspen fibers, which will reduce the number of fibers in the cooler pan.

Click here for more information

#2. MasterCool Rigid Media Pad – Great Pad For Your Cooler

If you want the best swamp cooler pads that will last you much longer than the others, the MasterCool Rigid Media Pad is the way to go. This brand uses cell deck media, which basically means it can be used for years, instead of just one cooling season like aspen pads.

We really like the fact that these pads can be kept wet without significant deterioration. Additionally, these mastercool rigid media pads have a cooling efficiency of around 90%. These pads are made of premium CELdek media and are able to retain a lot of water. Thus, they are able to cool quite efficiently and rapidly.

Also, they are very easy to install and have pretty much a universal fit into most evaporative coolers. You may need to do some custom cutting for a bit. The biggest trade-off is of course cost, as they will run you at least double the price of aspen pads.

Click here for more information

#3. Dial Dura Cool Evaporative Cooling Pads

We think the Dura-cool evaporative pads are the best swamp cooling pads if you want value. These pads come in a giant 20 feet roll that is enough for any occasion. We really like the fact that they are easy to cut to any shape. This is pretty important to some people who don’t really want to go through the trouble of trimming out these pads from rolls.

It also helps that they are odorless and non-allergenic. Additionally, they won’t shed fibers and can easily be rinsed with a garden hose to clean and be reused. In terms of performance, they are probably somewhere between Aspen and Paper. You will definitely get a better wetting area, but you sacrifice more air flowing through the pads.

So if you don’t mind having a bit less cooling power for the ability of a much easier maintenance and installation process, these are the right pads for you.

Click here for more information

#4. Aspen Snow Cool Cooling System

We think the Aspen Snow Cool pads are the best evaporative cooler pads if you have good value. These pads have more evaporative wicking area density than most swamp cooler pads on the market. It definitely performs better in terms of cooling power than paper or synthetic pads. Also, it features grid-flo stitching that prevents hot and dry spots with stabilizing grids.

This also helps get rid of sagging and reduces debris that clogs pumps and filters. You get 6 pads in this set that are 2 by 2 feet each. The company promises 7% cooler air and quicker air delivery than the leading pads in the industry. We can’t really back up this 7% number, but it does a great job of blowing out cooler air.

Also, the open cellular structure allows these pads to absorb more water. Finally, it is priced very reasonably for its performance.

Click here for more information

#5. Research Products Evaporative Cooler Pads Roll

The Research Products Evaporative Cooler Pads are certainly a good choice when it comes to swamp cooling. This is a 12 feet long roll of pad material made from the slit and expanded paper with a layer of polyester. This polyester serves to increase the filtration efficiency of the pad. In terms of performance, they definitely do not hold water as well as aspen pads.

The cooling is good and efficient, but definitely not nearly as good as Aspen or Mastercool rigid. However, the benefits are that it is cheap and easy to cut and install. Also, they are pretty allergy free and quite easy to wash and use again. These pads will definitely get the job done in most evaporative coolers but just don’t expect anything too fancy.

We recommend this roll to anyone who wants a cheap and highly customizable cooler pad that will fit in any model.

Click here for more information

Buying guide

  1. Longevity
  2. Hold water
  3. Colling performance

1. Longevity of an evaporative cooler pad

When shopping for swamp cooler pads, one of the most important factors to consider is longevity. The best cooling pads are those that last longer and require less frequent replacement. Some types of pads, such as aspen pads, are made from natural materials and tend to break down more quickly. Synthetic pads, on the other hand, are designed to be more durable and can last for several years with proper maintenance.

2. Hold water

Another important aspect of swamp cooler pads is their ability to hold water. Pads that can retain water for longer periods of time tend to be more efficient at producing cool air. This is because the more water a pad can hold, the longer it takes to evaporate, resulting in a cooler, more comfortable indoor environment.

3. Cooling performance

Finally, the overall cooling performance of the pad is a crucial factor to consider. The best cooling pads are those that can produce the desired temperature and humidity levels with minimal energy consumption. This not only saves money on utility bills, but also reduces the environmental impact of the cooler.

FAQ – Frequently asked questions on swamp cooler pads

Below provide the answers to some of the most common questions on pads and coolers.

How long do swamp cooler pads last?

The life of the pads depends on several factors, such as usage, maintenance, and the type of pads. Paper pads, which are more commonly used, can deteriorate quicker than other types. Over time, the pads lose their efficiency and may even become a breeding ground for bacteria and mold. To avoid this, it is crucial to know when it’s time to replace the pads.

Generally, it is recommended to clean the pads at least once every year or twice a year (before and after use) and replace them after 2-3 years. However, this is not a hard-and-fast rule, and the life of the pads can vary depending on usage and maintenance. For example, if you live in a dusty area with high chemical and mineral content in the water, the pads may need to be replaced more frequently.

Regular examination of the evaporative cooler pads is also essential in determining when they need to be replaced. Signs to look out for include a loss of thickness, rips, cracks, and fraying edges. If you notice any of these signs, it’s likely time to replace the pad. Ignoring these signs can result in poor air quality, reduced efficiency, and increased health risks.

In summary, swamp cooler pads have a limited lifespan and need to be replaced periodically. Regular cleaning and examination of the pads can extend their life and maintain the efficiency of the swamp cooler. Homeowners should keep an eye out for signs of wear and tear and replace the pads as needed, to ensure optimal performance.

How do swamp cooler pads work?

Swamp coolers are a great and cost-effective alternative to air conditioning, especially for people who live in arid regions. These coolers pull hot, dry air into the unit and pass it over evaporative cooling pads before dispersing the cooled air back into a room, home, or commercial space. It is the way they absorb water, how water passes through, and evaporates that makes these coolers unique.

Unlike air conditioning units that use refrigerants to cool the air, swamp coolers rely on water to create cool air. Warm air is drawn through the cooler and pads and then cooled and cleaned as it passes through the wet pads. Evaporative cooling happens as the moisture from the pads cools the air. Think about it like sweating – when you exercise, the sweat on your skin cools you down; similarly, an evaporative cooler pad cools the air by absorbing the warmth from it and releasing it through evaporation.

Swamp cooler pads do not need refrigerants or chemicals to cool the air. They only require a constant supply of water, which is stored within the cooler. The pads absorb water from this supply, and the water buildup within the cooler ultimately increases the humidity of the environment. However, it does not make the air inside of your home or commercial space feel heavy, like in a closed shower, due to the ventilation design of the cooler.

The absorbent nature of the swamp cooler pads is a crucial component of how they cool the air. These pads extend the life of the evaporative cooler by ensuring that the hot, dry air is cooled effectively. The design of the pads is such that they absorb water and pass the moisture through, ensuring that the pads always have adequate water flow. As water passes through the pad and evaporates into the filtered air, it helps to increase the cooler’s humidity, making it an ideal alternative for people looking for an eco-friendly cooling solution.

Swamp cooler pads are still an affordable and efficient way to cool any indoor environment. They depend on the evaporative cooling process to provide cool, clean air. Another great advantage of swamp coolers is they allow for an outdoor design that still provides the same level of efficiency indoors. The absorbent pads ensure that swamp coolers are economical and have a longer lifespan. The simple yet effective design of the swamp cooler pad makes it an ideal solution for those looking for an affordable, eco-friendly way to cool their indoor environments.

Can you cut swamp cooler pads yourself (Aspen, polyester)?

While it may be tempting to cut swamp cooler pads yourself to save a few bucks, it’s generally not recommended. The only time you should consider cutting your own pads is if you’re building a DIY swamp cooler from scratch. Even then, it’s worth considering whether purchasing a pre-cut pad is a better option. And this is true for all types of pads including blue synthetic pads, Aspen pads, mastercool pads, breezair, etc.

Cutting pads yourself can be time-consuming and tricky, as you’ll need to ensure the pads fit snugly around the water distribution tubes and are the correct size. Additionally, if you make a mistake while cutting, you may end up with a pad that’s too small or too large, which can negatively impact your swamp cooler’s performance. So, while DIY projects can be rewarding, it’s best to leave the cutting of swamp cooler pads to the professionals.

Final words

In conclusion, choosing the right swamp cooler pad is crucial to achieving optimal cooling performance and efficiency. By considering factors such as longevity, water retention, and overall cooling performance, you can find the perfect evaporative cooler pad for your home or business. With the right pad in place, you can enjoy a comfortable indoor environment even in the hottest, most arid regions.



The Review Gurus
Web Analytics